SCULPFUN S30: 5W Laser Engraving Machine with Automatic Air Assist

Main Features:

1. Automatically controlled air assist system: The traditional adapter air assist will always be turned on and cannot be controlled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 series is equipped with an airassist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

2. Replaceable protective lens: S30 series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power. A free lens is included with the purchase, more lens can be easily purchased from SCULPFUN.

3. Expandable engraving area on both XY axes: The S30 series adopts an innovative XY axis expandable design, the original engraving area is about  380x385 mm, but you can purchase a Y-axis expansion kit to expand the engraving area to 380x920mm; purchase an XY-axis expansion kit to upgrade Up to 900x920mm engraving area, which can help you better handle large area engraving or cutting work.

4. Industrial-grade cutting accuracy: S30 series adopts extremely solid and high-precision linear slide rail X-axis, making it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.

5. Detachable laser eye shield: The S30 series is equipped with a detachable eye shield, which will not dazzle even without glasses. Also if you don't need it, you can easily disassemble it.

6. Safety design: The presented A4 size steel pad can well protect the table from laser damage. Isolate fire hazards. There is a very safe and eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.

Packing list:

1×S30 laser; 1× Laser Repair Kit; 1×12V automatic air pump; 3 x A4 size 3mm wooden board; 2×Limit Switch; 1×12V 5A power adapter; 1 x power cord; 1×USB cable; 1× Air tube; 

1× Installation tool Kit; 1× Laser Goggles; 1 x A4 metal backing plate; Step 1-6 Install the package; 1× Manual; 1 x X-axis assembly; 2 x X profiles; 2 × Y profiles; 1×Control Box Assembly; 3 x support feet